AUXITO T10 168 LED Bulbs for Safe CANbus-Ready Vehicle Conversion, 12V 2W Low-Heat White Bulbs for Interior and Exterior Socket Swap, Pack of 2
AUXITO T10 168 LED Bulbs for Safe CANbus-Ready Vehicle Conversion, 12V 2W Low-Heat White Bulbs for Interior and Exterior Socket Swap, Pack of 2
Couldn't load pickup availability
Why you'll love it
- Plug-and-play install requires no wiring, resistors, or modification
- CANbus error-free design prevents annoying dashboard warning codes on modern vehicles
- 360-degree lighting with 24 SMD chips eliminates dark spots compared to single-point LEDs
- Wide cross-fit compatibility (194, 168, 175, 2825, W5W, T10) covers most car bulb sockets
- Multiple color options (white, red, amber, blue) enable both functional and aesthetic upgrades
- Low 2W power draw reduces strain on the vehicle electrical system and extends bulb life
Perfect for
- Replace dim halogen license plate bulbs with bright 6000K white LED for a cleaner look
- Upgrade interior dome, map, and reading lights for better cabin visibility at night
- Swap glove box, trunk cargo, and courtesy lights for easier item-finding in dark compartments
- Add a colored accent (red, amber, blue) to turn signal or marker lights for custom styling
- Fix dashboard error-free LED conversion on CANbus-equipped vehicles without triggering warning codes
Product Information
Voltage: 12V, color: 6000K xenon white, power: 2w/pc, lumen:500lm, dimensions: 1 by 0.47 inches, net weight: 2g/pc. Low power consumption for longer lifespan Each bulb has 24 pieces of 3014 led chips on it, 360 degree lighting angle, no blind spot, super bright brings your car a refreshed new look Fit bulb sizes: 168, 175, 194, 2825, W5W, T10, etc. Easy to install, just plug and play. Canbus error free, no error after installation Wide application: These led bulbs can be used for license plate tag light, map lights, dome light, front/rear side marker lights, trunk cargo room lights, turn signal lights, reading lights, glove box lights, inner tail light bulb, etc Package includes 2 pieces of AUXITO 194 led bulbs. Note: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm
Technical Details Brand AUXITO Specific Uses For Product license plate tag light, map lights, dome light, front/rear side marker lights, trunk cargo room lights, turn signal lights, reading lights, glove box lights, inner tail light bulb, etc Brightness 500 Lumen Item Package Quantity 2 Color Xenon White Auto Part Position Inside, Rear Light Output Maximum 500 Lumens Manufacturer AUXITO Automotive Fit Type Vehicle Specific Fit OEM Part Number 194,168,2825,W5W,T10 Model T10-24H-Black-W2-24V Item Weight 0.071 ounces Product Dimensions 0.39 x 0.39 x 1.02 inches Item model number T10-24H-Black-W2-24V Is Discontinued By Manufacturer No Exterior Machined Manufacturer Part Number AUXITO-US24HT10W2-230914 Mirror Lighting Type automotive-exterior-parking-light-bulbs, automotive-interior-map-light-bulbs, automotive-interior-dome-light-bulbs, automotive-interior-glove-box-light-bulbs, automotive-exterior-license-plate-light-bulbs Voltage 12 Volts
Frequently Asked Questions
Are these bulbs truly CANbus error-free on modern vehicles with bulb-out detection?
Yes. The built-in CANbus decoder circuitry mimics the electrical load of a standard halogen bulb, preventing the hyper-flash or bulb-out warning that many cheaper LEDs trigger on late-model vehicles.
Do the bulbs run hot enough to melt plastic lens covers or trim?
No. At only 2W per bulb, these LEDs run significantly cooler than the 5W halogen bulbs they replace, reducing the risk of heat damage to plastic license plate lenses and interior light housings.
Is the installation safe for someone with no automotive electrical experience?
Yes. The plug-and-play T10 wedge base matches the original socket one-to-one, so there is no cutting, splicing, or resistor wiring. Just remove the old bulb and push the new one in.
Will these bulbs interfere with my vehicle's airbag or sensor systems?
No. LED bulb swaps in standard lighting sockets operate independently of airbag and sensor circuits. The CANbus-safe design only communicates correctly with the body control module, without crosstalk.
Do the bulbs contain any hazardous materials I should worry about?
The bulbs are solid-state LED components with no mercury, no glass envelope, and no liquid chemicals, making them safer to handle and dispose of than traditional halogen or xenon bulbs.
Are these bulbs safe to install on a CANbus-equipped car without triggering a dashboard warning?
Yes. The CANbus-ready circuitry is specifically designed to prevent the bulb-out error code that appears when the body control module detects a lower-than-expected current draw from an LED.
Will the bulbs work safely in my car's glove box or trunk without ventilation?
Yes. The low 2W consumption produces minimal heat, so enclosed compartments like the glove box and trunk cargo area present no thermal risk during normal operation.
Is the 6000K white light safe for reading maps or paperwork at night without eye strain?
The 6000K tone is close to natural daylight, which is generally easier on the eyes for short reading tasks compared to the warm but dim yellow of factory halogen bulbs.
How do these compare to cheap no-name LEDs that flicker or cause errors?
Cheap LEDs often lack proper CANbus resistors and use inconsistent chip batches, leading to flicker, partial illumination, or dashboard warnings. AUXITO uses matched 3014 SMD chips and a stable driver circuit for consistent output.
Are these bulbs safer to ship and store than halogen bulbs?
Yes. LED bulbs have no fragile filament or glass envelope, so they are far more resistant to vibration and impact during shipping and long-term storage in a garage or vehicle.
Will the bulbs fail safely if they reach end of life, or could they short my electrical system?
LEDs gradually dim rather than catastrophically fail. The integrated driver circuit includes protection against reverse polarity and brief voltage spikes typical in automotive electrical systems.
Do I need to add a resistor to make these work safely on my vehicle?
No external resistor is required. The CANbus circuitry is built into the bulb base, so a true plug-and-play installation is safe and complete right out of the box.
What happens if I install one of these and a warning light still appears?
A small number of vehicles use very strict bulb monitoring. In those rare cases, an additional CANbus decoder adapter (sold separately) can be added in line, but the vast majority of installs are warning-free.
How do I install these T10 LED bulbs in my vehicle?
Locate the bulb socket, gently remove the existing halogen bulb by pulling straight out (or twisting if a locking collar is present), insert the AUXITO LED bulb into the T10 wedge base, and reinstall the lens cover. No tools or wiring modifications are required for the standard 194, 168, 175, 2825, and W5W sockets.
Can I install these bulbs in both interior and exterior light sockets?
Yes. The T10 wedge base is used in many interior positions (dome, map, courtesy, glove box, trunk) and exterior positions (license plate, side marker, tag light). Confirm the existing bulb type matches 194, 168, 175, 2825, W5W, or T10 before installing.
How long do these LED bulbs typically last?
LED bulbs of this type commonly last 30,000 to 50,000 hours of normal use, which for typical vehicle applications translates to many years of service life, far outlasting the 1,000 to 2,000 hour lifespan of a standard halogen bulb.
Will these bulbs fit my specific vehicle make and model?
These bulbs fit any vehicle that uses a 194, 168, 175, 2825, W5W, or T10 bulb in the target socket. Check your owner's manual bulb specification chart, or remove the existing bulb to confirm the base type before ordering.
Are these bulbs compatible with both 12V and 24V electrical systems?
These bulbs are rated for 12V systems, which covers all standard gasoline and diesel passenger vehicles. For 24V commercial trucks, a 24V-rated LED variant is required.
What is included in the box when I order?
The package includes the specified quantity of AUXITO T10 LED bulbs (pack of 2 in this listing) in protective retail packaging. No additional resistors, decoders, or wiring adapters are required for the standard plug-and-play installation.
Do I need to buy any extra parts or accessories to complete the install?
No. The built-in CANbus circuitry and direct-fit T10 base mean the bulbs install using only what is in the box. Some vehicles with very strict bulb monitoring may benefit from an optional external CANbus decoder, but this is uncommon.
What should I do if a bulb arrives damaged or does not work on install?
Contact AUXITO customer service with your order number and a brief description of the issue. Warranty claims are processed quickly, and most customers receive a replacement pair without needing to return the original bulbs.
Are these LED bulbs dimmable with my vehicle's interior lighting dimmer?
Most factory-installed dimmers for dome and map lights will work with these LED bulbs. Some aftermarket PWM-style dimmers may cause a faint high-frequency flicker, which is normal and does not damage the bulb.
What is the difference between these T10 LED bulbs and standard 194 halogen bulbs?
Standard 194 halogen bulbs produce a warm yellow light at around 5W with a 1,000 to 2,000 hour lifespan. The AUXITO T10 LED produces a 6000K xenon-white light at 2W, with 360-degree emission from 24 SMD chips, a 30,000+ hour lifespan, and CANbus-error-free operation on modern vehicles.
