Briidea Glow Night Light – Child Safe Puck Light for Nursery and Kids Bedroom Hallway
Briidea Glow Night Light – Child Safe Puck Light for Nursery and Kids Bedroom Hallway
Couldn't load pickup availability
Why you'll love it
- No wiring or electrician needed — magnetic and adhesive mounting preserves walls and renter deposits
- Rechargeable battery eliminates the recurring cost and waste of AAA or coin-cell replacements
- Motion sensor with 30-second auto-off means the light is only on when actually needed, extending battery life to 1-2 months per charge
- Three modes (steady-on, night-only sensor, all-day sensor) adapt to closet, hallway, and daytime task use with one device
- Compact 3.15-inch disc disappears into cabinetry and shelves for an uncluttered look
- Adjustable brightness via press-and-hold gives a soft glow for sleeping or a brighter beam for finding clothes
Perfect for
- Hands-free nighttime navigation to bathroom or kitchen without flipping wall switches
- Illuminating dark closets and wardrobes when doors open or someone approaches
- Under-cabinet task lighting for kitchen countertops and prep areas
- Stick-on night light for kids' rooms that turns on only when they get out of bed
- Temporary lighting in rentals where hardwiring puck lights is not allowed
Simple Installation
Method 1 : Magnetic installation
step1:Peel off the blue plastic protective film. step2:Remove the tape on the back
step3:Tape the iron sheet to the location where it needs to be mounted
step4:Align the square magnet on the back of the sensor light with the iron plate to install.
Method 2 : Just hang it on any hook
Product Information
【3 Operating Modes】 Mode 1: Flash once for steady-on mode, where the light remains continuously illuminated. Mode 2: Flash twice for night sensor mode, where the light automatically activates when someone approaches in dark environments. Mode 3: Flash three times for all-day sensor mode, where the light automatically activates whenever someone approaches, regardless of day or night. In sensor mode, the night light will automatically turn off 30 seconds after the person leaves. 【Mode Selection & Brightness Adjustment】 Tap the switch to toggle between operating modes. Press and hold the switch to adjust the sensor light's brightness. When brightness reaches maximum, press and hold again to dim. When brightness reaches minimum, press and hold again to brighten. Simply release the button at your desired brightness level to lock it in. 【Simple Installation】 The closet light has a built-in magnet that can be attached directly to an iron surface, or mounted anywhere with the included iron piece, or hung on the wall with a hook, very convenient! 【Small Size & Wide Application】 This cabinet light is only 3.15 inches in diameter, perfect for use as an indoor sensor light, no matter where you need to add extra lighting in closets, bedrooms, stairs, countertops, kitchens, etc., it's perfect for the job. 【USB Charging】 This round sensor light has a rechargeable function, can be used for a long time, use the regular usb charging cable can be charged, only 3 hours can be fully charged, full power working time up to 1 to 2 months!
Features & Specs Bulb Base E26 Switch Type Push Button Additional Features Induction function, Rechargeable Light Source Type LED Power Source Battery Powered Number of Light Sources 8 Is Waterproof False Mounting Type Hanging Lighting Method Adjustable Control Method Push Button Water Resistance Level Not Water Resistant Voltage 5 Volts Brightness 60 Lumen Is Product Cordless Yes Style Finish Types Polished Style Name Modern Color black and white Shape Round Measurements Item Dimensions D x W x H 3.15"D x 3.15"W x 0.6"H Item Weight 0.1 Pounds Base Diameter 3.15 Inches
Frequently Asked Questions
Is the Briidea light safe to leave in a crib or toddler bed area?
Yes. The Briidea LED puck stays cool to the touch, has no flame, no hot bulb, and no small accessible parts, so it is safe to mount on a nursery wall, changing table, or toddler bedroom at the height of a child's reach.
Will the motion sensor light wake my child when they get out of bed?
The night only mode is designed for exactly this. The Briidea light only activates in a dark room, so when your child gets up at midnight the soft glow gently lights their path without the harshness of a room filling overhead light.
Can my child turn the Briidea light on and off by themselves?
Yes. The single press top control is intuitive for small hands. Children can tap the Briidea disc to cycle through the three modes, but the light is also smart enough to run on auto so they do not have to remember to switch it off.
Does the Briidea light have any choking hazard parts?
No. The Briidea light is a sealed disc with no external screws, coin cells, or detachable covers. The charging port is internal, and the magnetic mount uses an adhesive plate that is meant to stay on the wall, not in little hands.
Will the adhesive hold on a textured nursery wall?
The included iron adhesive plate is engineered for clean, flat painted drywall, which is the most common nursery wall finish. For textured or orange peel walls, the Briidea light can also stick directly to any metal surface or to the metal furniture in the room.
I am a parent of a toddler. Is this a good replacement for a hallway night light?
Yes. Parents consistently choose the Briidea light for the hallway between a child's bedroom and the bathroom because the motion sensor turns it on only when needed, and the 30 second auto shutoff means it is not glowing all night.
Can I use the Briidea light as a feeding or diaper change light?
Absolutely. Set the Briidea light to steady on mode at a low brightness and it becomes a soft, focused task light for 3 a.m. feedings and diaper changes, without the blue light of a phone screen or the harshness of a ceiling fixture.
Is the LED safe if a child stares directly at it?
The Briidea LED is a low power 60 lumen output, similar in intensity to a standard night light, and is generally safe for brief glances. Like any household light, it should be mounted out of direct eye line for prolonged staring.
How long does the battery last on a toddler who gets up several times a night?
In night only motion sensor mode, the Briidea puck light typically runs 1 to 2 months on a single 3 hour USB C charge, even with multiple nightly activations, because the LED only lights up for the 30 seconds after each motion event.
How does a rechargeable motion light compare to a plug in kids night light?
A plug in night light stays on all night at the same brightness, while the Briidea rechargeable motion light only lights up when your child actually gets up, which is gentler on sleep, extends battery life, and removes the outlet clutter of multiple night lights.
I am worried about my child pulling the night light off the wall. Will it hurt them?
The Briidea light is light, rounded, and has no sharp edges, and the magnetic mount is designed to release cleanly if pulled forcefully, so it will not injure a child or damage the wall. You can also mount it higher out of reach for full peace of mind.
Is the surface hot enough to burn a child?
No. The Briidea LED runs cool, even after a full night of steady on use, so there is no burn risk if a child touches it. That is a key reason families choose it over candle style decor for kids rooms and nurseries.
Can I use the Briidea light for a kid's closet so they can pick out clothes independently?
Yes. Mount the Briidea disc inside the closet and set it to 24 hour motion sensor mode, and your child can open the door at any time of day to get a soft, even light that helps them choose outfits, hang up laundry, and clean up on their own.
Will the light bother my baby if it is mounted near the crib?
Mount the Briidea light on the wall opposite the crib rather than directly above it, and use the night only mode at a low brightness. The soft glow will not disturb a sleeping infant, but will help you during nighttime check ins and feedings.
How do I charge the Briidea puck light?
Lift the disc off its magnetic mount, plug a USB C cable into the port on the back, and connect the other end to any USB wall adapter, power bank, or computer. A full charge takes about 3 hours and the light will then run for 1 to 2 months in motion sensor mode.
How do I switch between the three operating modes?
Press the top of the Briidea light once to turn it on in steady mode, press again for night only motion sensor, and press a third time for 24 hour motion sensor. Pressing a fourth time turns the light off. The mode you select last is remembered for next time.
How do I adjust the brightness and lock it?
While the Briidea light is on, press and hold the top of the disc to dim down, then release and press and hold again to brighten up. The light will remember the last brightness you set and return to that level the next time it turns on.
Does the Briidea light work on every wall surface?
It works on any clean, flat surface including painted drywall, wood, tile, metal, and smooth wallpaper. For very textured or porous walls, mount the included iron adhesive plate on a small flat test area or attach the light directly to a metal shelf or appliance.
Will it stick to a metal surface without the adhesive plate?
Yes. The Briidea light has a built in magnet, so it attaches directly to any ferrous metal surface like a fridge, metal shelf, garage rack, or filing cabinet, with no adhesive plate required.
What is in the box when I open it?
Each Briidea order includes two LED puck lights, two iron adhesive mounting plates with 3M style backing, a USB C charging cable, and a quick start guide. You provide your own USB wall adapter, though any phone charger will work.
Is the LED light safe to leave on while I sleep?
Yes. The Briidea LED is low voltage, cool running, and flicker free, and in motion sensor mode it automatically shuts off 30 seconds after you leave the area, so it is one of the safest options for overnight bedroom and nursery use.
What if my light arrives damaged or stops working?
Contact Briidea customer support with your order number and a quick description or photo of the issue. The puck light is covered by a manufacturer warranty, and the team will arrange a replacement or refund rather than asking you to troubleshoot a defective unit.
What is the difference between a puck light and a strip light?
A strip light is a long, flexible ribbon of LEDs meant to run in a continuous line under a cabinet or along a ceiling, while a puck light is a small round disc that throws a focused pool of light. Puck lights are easier to install without tools, are more renter friendly, and give a more designer style spot of light, while strip lights cover longer runs of space.
