Command Hand Towel Bar Matte Black Damage Free Towel Holder with Water Resistant Strips, 9 in Bar Length Holds up to 3 lbs, Protects Rental Deposit
Command Hand Towel Bar Matte Black Damage Free Towel Holder with Water Resistant Strips, 9 in Bar Length Holds up to 3 lbs, Protects Rental Deposit
Couldn't load pickup availability
Why you'll love it
- No holes, no drilling, and no sticky residue keeps rental deposits safe and walls intact
- No tools required makes installation fast and accessible for anyone
- Water-resistant strips are specifically engineered for humid bathroom environments
- Two finish options (Matte Black and Satin Nickel) let buyers match their existing bathroom hardware
- Removes cleanly, allowing easy repositioning or take-down when moving
- Adheres to many surfaces including glass, mirror, tile, and painted walls for flexible placement
- Bar stays attached to the wall just as advertised
- Bar can be repositioned by sticking it up lightly first, standing back, and checking if it's straight before pressing down
- Extra adhesive pieces can be purchased separately to reposition the rack elsewhere
- Sticks to painted walls unlike most competitors
- Came back off the wall without any damage when moving out
- 3 lb weight capacity is more than enough for several towels
- End pieces can be pulled out slightly for more wiggle room between bar and brackets
- Simple and clean design
- Good value compared to local store prices
- Brushed chrome look is nice
- Removable bar mechanism (slide connectors up to remove rack) makes it easy to take down the bar while leaving base on wall
Perfect for
- Hanging a hand towel in a rental bathroom without damaging walls
- Quick bathroom decor refresh with no commitment to permanent fixtures
- Adding towel storage in a guest or powder room
- Renter-friendly bathroom organization solution
- Easy upgrade when moving into a new apartment or dorm
- Mounted on the bathroom mirror using command strips instead of suction cups
- Hanging plastic bath mat to dry within the shower
- Hanging hair and wrist bands for face washing behind bathroom door
- Hanging bath mat on large towel bar behind bathroom door
- Holding pot holders in the kitchen when combined with a hook
- Hanging a loofah inside bathroom cupboard with a hook
- Used in a shower built out of epoxy
- Hanging towels inside kitchen cabinets
- Used in a camper for kitchen towels
Product Information
INCLUDES – 1 Towel Bar, 4 Medium Water-Resistant Strips NO TOOLS REQUIRED- No holes, no drilling, and no hassle DAMAGE FREE BATHROOM ORGANIZATION – Refresh your bathroom with these stylish, easy to install, and DAMAGE FREE Command bathroom fixtures STRONG AND VERSATILE- Holds strong and can adhere to most surfaces, including glass, metal, mirror, tile, laminates, finished woods, and painted surfaces while holding up to 10lbs when weight is evenly distributed REMOVES CLEANLY- No sticky residue, no holes, no suction cups
The Command Bath Towel Bar makes it easy to refresh your bathroom fixtures without damaging your walls. It is easy to install and comes off leaving no holes or sticky residue, providing a great alternative to damaging nails and screws. The bath towel bar sticks to many surfaces, including glass, mirror, tile, finished wood and painted surfaces.
Frequently Asked Questions
Will the Command strips hold securely in a steamy bathroom without falling?
Yes. The included medium water-resistant Command Strips are specifically engineered for humid, wet environments like bathrooms and showers, and the bar is rated to hold up to 3 lbs when applied to a compatible surface.
Is it safe to mount this on a mirror above a sink where kids might bump it?
Yes. When properly applied, the bar stays firmly attached and tolerates everyday bumps. The bar is also low-profile, so it does not protrude into head space the way some hooks and rings do.
Can the bar be removed safely without damaging the wall or mirror?
Yes. The strips are designed for damage-free removal: you simply stretch the strip slowly straight down, and it releases from the surface without pulling paint, leaving holes, or leaving sticky residue behind.
Is this safer than drilling into a tile wall in a rental?
Yes. Drilling into tile risks cracking the tile, hitting pipes or wires, and losing part of your security deposit. This bar avoids all of those risks because it requires no drilling, no anchors, and no holes.
Is it safe for households with children and pets?
Yes. There are no sharp edges, no exposed screws, and no flame or electrical components. The bar is a passive piece of hardware that simply holds a towel, and the adhesive is contained behind the base.
Will the bar come loose and drop a wet towel on the floor?
When properly installed on a clean, compatible surface, the water-resistant strips maintain a strong hold in humid conditions. To ensure maximum hold, clean the surface with isopropyl alcohol before applying and let it dry fully.
What happens if the bar is bumped hard, will it pop off?
Customers report that the bar tolerates everyday bumps well, and the slide-off design means the bar can release from the base under unusual force, which can help prevent damage to the wall or the bar itself.
Is the installation process safe for someone who has never used tools?
Yes. There are no tools involved at all, so there is no risk of slips with a drill, no flying tile dust, and no need for safety glasses. You only need a clean cloth and isopropyl alcohol to prep the surface.
Is the adhesive safe to use on a bathroom mirror without damaging the backing?
Yes. Command Strips are designed to adhere to glass and mirrors and release without damaging the silver backing when removed according to instructions, which is one of the most common and recommended uses.
Is the bar safe to mount on a painted wall in a kid's bathroom?
Yes. Many customers specifically choose this product because it sticks to painted walls where many competitors fail. Use the included water-resistant strips and follow prep steps to ensure a secure, long-lasting bond.
How does this compare to suction-cup hooks in terms of safety?
Suction cups can suddenly release in humidity and drop a wet towel or bath mat, which can be a slip hazard. Adhesive-backed Command strips provide a more reliable, longer-lasting hold in wet environments.
How does it compare to a drilled bar with anchors in terms of wall safety?
A drilled bar creates permanent holes that must be patched and may violate your lease. This bar leaves walls completely intact, which protects both your security deposit and the long-term integrity of the wall.
Is this safer for renters than over-the-door hooks?
Yes. Over-the-door hooks can damage the door, scratch paint, and pinch fingers. This wall-mounted bar keeps the door completely free and poses no risk of door-related damage.
Will the adhesive leave a sticky, hard-to-clean residue on the wall?
No. When removed according to the included stretch-release instructions, the strips come off cleanly with no residue, no staining, and no need for harsh chemicals or scraping.
Is the bar safe for use inside a shower built with epoxy or tile?
Yes, with proper prep. Customers have reported success mounting the bar inside showers on smooth tile and epoxy surfaces by thoroughly cleaning with isopropyl alcohol and allowing it to dry before applying the strips.
I'm worried about damaging my apartment walls, will this truly come off cleanly?
Yes, that is the core purpose of the product. Tens of thousands of renters report clean removal when the strips are stretched slowly straight down rather than pulled off at an angle, making it one of the safest options for deposit protection.
How do I install the Command Hand Towel Bar step by step?
First, choose a clean, smooth surface such as tile, glass, mirror, or painted drywall. Clean the area with isopropyl alcohol and let it dry completely. Separate the four medium water-resistant Command Strips and pair them according to the instructions. Press two strips onto the back of each base, then remove the liner and press the bases firmly onto the wall for 30 seconds. Wait one hour to let the adhesive set, then slide the bar onto the connectors and it is ready to use.
How do I remove the bar without damaging the wall?
Hold the bar steady, then grasp the small tab at the bottom of each Command Strip and stretch it slowly straight down (never at an angle or outward) until the strip releases from the wall. The base will come away cleanly, leaving no holes, no marks, and no sticky residue when removed according to instructions.
How do I reposition the bar if I mount it crooked the first time?
Before pressing the base firmly to the wall, you can lightly position it, stand back, and check the level. If you need to adjust, gently pull the base off the wall and re-stick it. Once the bar is fully pressed and loaded, you can also purchase replacement Command Strips to relocate the bar to a new spot.
Does this work on glass shower doors and tile?
Yes. The water-resistant Command Strips are engineered to bond to smooth glass, mirror, ceramic tile, and metal, making the bar a popular choice for shower doors and tiled bathroom walls when the surface is properly cleaned with isopropyl alcohol first.
Can I use this on a bathroom mirror with command strips instead of suction cups?
Yes. The bar is designed to mount on mirrors using the included water-resistant Command Strips, which is a more reliable long-term hold than suction cups, especially in steamy bathrooms where suction cups often release.
What is included in the box, and what do I need to buy separately?
The box includes the 9-inch towel bar, two wall bases, and four medium water-resistant Command Strips. You do not need any tools. If you plan to move the bar to a new location, you can purchase replacement Command Strips separately.
Is the adhesive strong enough to hold a wet towel without slipping?
Yes. The bar holds up to 3 lbs when installed on a compatible surface, which is more than enough for one or two folded hand towels, a damp loofah, or a small bath mat hung to dry.
Will the bar eventually lose its hold in constant humidity?
When installed with the included water-resistant strips on a properly prepped surface, the bar is designed to maintain its hold in humid bathroom environments for extended periods. If the hold ever weakens, replacement Command Strips can be purchased and the bar remounted with fresh adhesive.
What is the difference between a Command towel bar and a regular drilled towel bar?
A regular drilled towel bar requires tools, anchors, and permanent holes, and usually cannot be removed without patching and repainting the wall. A Command towel bar uses water-resistant adhesive strips, requires no tools, holds up to 3 lbs, and removes cleanly, making it ideal for renters and anyone who wants a no-commitment install.
