LucentGlow LED Under Cabinet Light – Cool Touch Kitchen Task Lighting Around Kids and Pets
LucentGlow LED Under Cabinet Light – Cool Touch Kitchen Task Lighting Around Kids and Pets
Couldn't load pickup availability
Why you'll love it
- no drilling or screws means zero damage to rental walls and cabinets
- built-in magnets let you snap lights on and off for recharging or repositioning in seconds
- USB-powered design plugs into any 5V source, removing the need for an electrician
- flicker-free DC driver protects eyes during long study or work sessions
- 2-pack with included AC plug delivers stronger per-unit value than single-bar competitors
- 100,000-hour LED lifespan means it outlasts fluorescent tubes by years
- Top quality feel right out of the box
- Magnetic self-attachment to metal surfaces with no mounting hardware needed
- Can run off any USB port including monitor USB ports, USB power banks, or 3D printer USB ports
- USB extension cords work well to extend reach
- Reasonable price for a 2-pack including power supplies
- No RF interference when used near radio equipment
- Color temperature nearly exact match to replaced fluorescent lighting
- Works fine with wall switch without needing to use the inline cord switch
- No flicker or degradation after near-continuous use
- Diffuser provides even light distribution
- Lightweight enough that adhesive patches hold it reliably
- Can be cut to desired length and wired in series (for cuttable variants)
Perfect for
- plug-in task lighting under kitchen cabinets for food prep
- closet or wardrobe illumination to find clothes in dim corners
- dorm desk reading and study lamp without a bulky fixture
- DIY accent lighting on shelves, consoles, or display cases
- bedside reading light mounted without drilling into walls
- Interior lighting inside 3D printer enclosures (Ender 3 V3 SE, Ender 3 KE, and other models)
- Retrofitting existing kitchen cabinets with under-cabinet lighting
- Lighting for chicken incubators
- Illuminating a crystal collection display
- Hunting cabin bed area lighting via USB power bank
- Inspecting scuba tanks
- Alcove lighting for a washing machine area
- Standby emergency lighting for power outages
- Replacing fluorescent workbench lighting with similar color temperature strip
- Mounting inside custom cabinetry builds
- Car interior/use as automotive lighting
- Radio room lighting (with no RF interference)
- Closet wire shelving illumination (mounted with zip ties)
Crisp Task Light, Effortless Freedom.
From kitchen prep to workshop projects, get bright 6500K light that moves as you do.
Tool-Free Installation, Effortless Transformation.
Two Adhesives, Total Flexibility
For Permanent Hold: Strong adhesive pads - stick once and forget.
For Flexible Movement: Steel pads - move and relocate your light anytime.
No tools, no hassle.
Snap & Go. No Tools, No Holes.
Instant Magnetic Attachment Just snap the light onto any steel surface—fridges, cabinets, toolboxes. It holds secure, yet removes freely for endless flexibility.
Product Information
【Easy Installation】Kitchen lights can be installed in various ways, no screw needed, easy and handy.The built-in magnets allows you to remove or reinstall the light anytime. The power cord is 59 inches long. 【ENERGY SAVING】Closet Lights with High-brightness LEDs are 85% more power-saving than fluorescent tubes, so you don’t need to spend too much electricity and can meet the daily needs of lighting; the life of LED lamp beads can reach 100,000 hours, so a MINI table lamp can be used for many years, and it is never used Buy a new lamp for the burnt out lamp. 【Health Eye Protection Lamp】USB Powered under cabinet lights driver adopts microcomputer controlled DC drive, no flicker, and protects people's eyes. Never worry that reading under the light will hurt your eyes. We all call it a health and eye protection lamp. 【Multiple Uses】LED Stick on Lights can be used in any scene that can provide USB interface power supply to meet any of your DIY designs, such as: kitchen, wardrobe, bedroom, university dormitory, console, desk, desk, etc. 【Complete Packaging Accessories】Under Counter Light Fixtures 2 sets of installation accessories include 4 double-sided tapes and 4 metal sheets, which are convenient to install in any place and do not need to be punched. LED under cabinet lighting provides free lifetime warranty. If there is any problem, we will respond and solve it within 24 hours Program.
Features & Specs Room Type Bedroom,Dormitory,Kitchen,Home Office,Library,Study Room,Wardrob Specific Uses For Product reading, work, dorm Indoor Outdoor Usage Indoor Power Source AC/DC Other Special Features of the Product Energy Efficient, Low Voltage, No Flicker, USB Powered Control Method Push Button Light Source LED Number of Light Sources 30 Voltage 5 Volts (DC) Light Color White light, color temperature 6500K Lighting Method Downlight Wattage 10 watts Controller Type Push Button Switch Type Push Button Water Resistance Level Not Water Resistant Brightness 1000 Lumen Efficiency energy-efficient Mounting Type Under Cabinet Mount Fixture Type Non Removable Style Color White Style Name 12" Strip Light Light Fixture Form Path Theme Lighting Shape 12" Strip Light Shade Color White Materials & Care Material Type Aluminum Finish Types Frosted Silver Shade Material Plastic Measurements Item Dimensions L x W x H 12"L x 1"W x 1"H Item Weight 0.24 Pounds Number of Items 2 Unit Count 2.0 Count
Frequently Asked Questions
Is this light safe to use inside a child's closet or bedroom?
Yes. The LED bar runs cool to the touch, uses low voltage 5V DC power, and has no hot bulb or exposed filament, making it a much safer choice than incandescent or halogen closet lights.
Can I leave this light on overnight without fire risk?
Yes. With 5V USB power, no heating element, and a 100,000 hour LED lifespan, the bar is designed for long run times. Many buyers use it as a standby or emergency light during power outages when paired with a power bank.
Is the surface safe to touch even after hours of use?
Yes. The aluminum housing stays comfortably cool during continuous use, so there is no burn risk for curious children, pets, or anyone who accidentally brushes against the bar.
Can I use this in a pet enclosure or reptile habitat safely?
Yes. Many reptile and small pet owners mount the bar inside enclosures because it runs cool and provides consistent light. Always check species specific temperature and UVB needs with your veterinarian first.
Is the flicker free driver safer for sensitive eyes?
Yes. Steady, flicker free light reduces eye strain, headaches, and fatigue, which is especially important for children, students, and anyone who works or reads under the light for long periods.
Does the low voltage power make it safer than a wired fixture?
Yes. The 5V DC USB input is far safer to handle than mains voltage wiring, which makes installation and repositioning much lower risk, especially in homes with children.
Is this safer than a candle or oil lamp for ambient lighting?
Yes. There is no open flame, no hot wax, no smoke, and no soot, which eliminates the risk of fire, burns, and indoor air quality issues associated with candles and oil lamps.
Can I use this as a safe emergency light during outages?
Yes. When paired with a USB power bank, the bar runs for hours as a flameless, low heat emergency light for bedrooms, hallways, and kitchens during power outages.
Is it safe to mount above a kitchen work surface where food is prepared?
Yes. The sealed aluminum housing and cool running LEDs are safe above food prep zones, and there is no glass bulb to shatter if the bar is bumped.
Will the bar overheat inside a closed 3D printer enclosure?
The 10W draw and efficient LED design keep the bar cool even in enclosed spaces, and many 3D printer users run them continuously inside Ender 3 and similar enclosures without thermal issues.
Is this safer than a halogen under cabinet light?
Yes. Halogen bulbs run extremely hot and can scorch cabinets or ignite grease buildup, while this LED bar stays cool, uses 85 percent less energy, and has no fragile hot bulb.
Is it safer than battery powered puck lights?
Yes. Rechargeable and replaceable coin cells in puck lights can leak or overheat, while this bar uses standard 5V USB power with a stable, regulated driver for safer long term use.
What happens if my child pulls on the power cord?
The 5V USB input is low voltage and low current, so a tug on the cord poses a much lower risk than a mains voltage fixture. The bar is also lightweight and uses adhesive or magnetic mount, so it is unlikely to cause injury if pulled.
Is the light safe for use around elderly family members?
Yes. The cool touch housing, simple inline switch, and bright even light help reduce trip hazards in closets and hallways and are safe to handle for users with limited mobility or sensitivity.
Can I use this in a child's reading nook without worrying about heat?
Yes. The bar stays cool during long bedtime reading sessions, so it can be mounted near bedding, curtains, or stuffed animals without the heat risk associated with incandescent or halogen reading lamps.
Is there any risk of electrical shock when changing mounting location?
No. The 5V USB design is low voltage and safe to unplug and remount whenever you need, with no risk of shock during repositioning.
How do I install the light without drilling into my cabinets?
Use the two built in magnets to snap the bar directly to any ferrous metal surface, or stick one of the included metal plates to your cabinet with the double sided adhesive tape and then magnet mount the bar on top. Velcro strips are also included for additional mounting options.
How do I power the light and how long is the cord?
Plug the included AC adapter into any standard wall outlet, then connect the 59 inch USB cable from the adapter into the light bar. You can also power the light from any 5V USB source such as a computer, monitor, TV, 3D printer USB port, or USB power bank. A standard USB extension cable can be used to add extra reach.
Can I cut the light bar to a custom length for my project?
On cuttable LED strip versions, yes. The strip can be cut at the marked cut lines and the pieces can be wired in series to fit custom cabinetry, display cases, or enclosure builds. Always follow the included instructions and use compatible connectors when re wiring.
Will this light work with my 3D printer enclosure?
Yes. The bar is a popular choice for Ender 3 V3 SE, Ender 3 KE, and similar 3D printer enclosures. The 5V USB input plugs directly into most printer USB ports, and the slim 12 inch bar fits inside the top or side of most enclosures. The light also runs cool and does not interfere with printer electronics.
Is it compatible with USB power banks and smart plugs?
Yes. The 5V DC input works with any standard USB power bank for cordless or emergency use, and it pairs well with most USB smart plugs and outlet timers for automated on and off scheduling. Measured draw is around 5.4W at 5.09V and 1.07A, which is well within the rating of typical USB power sources.
What is included in the box?
Each 2 pack includes two 12 inch LED light bars, two AC power adapters with 59 inch USB cables, four double sided adhesive tapes, four metal mounting plates, Velcro mounting strips, and a user guide. Everything needed for a no tool install is in the box.
Is this light safe to leave plugged in all the time?
Yes. The regulated 5V DC driver and cool running LEDs are designed for long continuous use. Many buyers leave the bar plugged in as a standby or closet light for months at a time without issues. As with any electronic device, unplug during extended absences for added peace of mind.
What should I do if the light flickers or does not turn on?
First, confirm the USB connection is fully seated at both ends. Try a different USB port or AC adapter to rule out a weak power source. If the bar still flickers, remove any extension cable and test with the included cable. Persistent issues are covered by the manufacturer's warranty, so contact support for a replacement.
What is the difference between an LED light bar and an LED strip light?
An LED light bar like this one uses a rigid aluminum housing with a built in diffuser, integrated magnets, and a dedicated power cord for a clean, tool free install. An LED strip light is a flexible adhesive backed ribbon that is usually cut to length and wired into a separate driver. Bars are easier to mount and reposition, while strips are more flexible for curves and custom shapes.
