LUMI LIVING Warm White Motion Sensor Puck Light – Cozy Ambient Accent Lamp for Bedroom and Living Room
LUMI LIVING Warm White Motion Sensor Puck Light – Cozy Ambient Accent Lamp for Bedroom and Living Room
Couldn't load pickup availability
Why you'll love it
- No wiring or electrician needed — stick-on magnetic mount is renter-friendly and damage-free
- Auto-on only in darkness with 20s auto-off saves battery and avoids manual switching
- Rechargeable lithium battery eliminates the recurring cost and waste of AAA replacements
- Sensitive 16ft / 120° motion sensor lights up the moment you enter a dark space
- Compact 3.4-inch puck form blends into furniture rather than looking like a fixture
- Choice of warm 3000K or cool 6000K lets buyers match bedroom mood vs. task-lighting needs
- Used as emergency light during a power outage while cooking
- Magnet allowed attaching to gas stove for hands-free light while cooking
- Charging indicator changes from red to green (looks like Christmas)
- Backup rotation: keeping a charged spare ready to swap in
- Arrived with some pre-charge out of the box
- Warm light option available and looked great
- Reasonable price point
- Wide width fit accent lamps perfectly (Spanish review)
Perfect for
- Hands-free closet lighting when reaching for clothes in the dark
- Nighttime hallway and stair navigation to prevent trips and falls
- Under-cabinet kitchen task lighting without rewiring
- Rechargeable backup lighting for power outages
- Quick-install pantry or storage room illumination
- Litter box enclosure lighting
- Camper/RV interior lighting
- Emergency lighting during power outage
- Garage entryway lighting
- Bathroom lighting (Spanish review) without existing electrical
- Deep wall cabinet lighting
- Coffee station lighting
- Display cabinet (vitrina) lighting
- Shoe closet lighting
- Hallway closet ceiling mounting
IMPROVED LONG-LASTING Rechargeable Motion Sensor Light Indoor for Closet, Cabinet, Kitchen, Pantry, Stairway, etc.
What Are Improved:
- Brighter: Upgraded Brightness +50%
- Larger Battery: Battery Capacity +50%
- Long-Lasting Charge: Glowing Time+30%, Usually Months-Lasting in Auto-Mode.
- Magnet Adhesive Enhanced
- Sensitive Motion Sensor
- Rechargeable: Save lots of batteries
Very Lightweight without AA batteries. Great for indoor use, both home and travel.
GREAT for SMALL spaces. May need more lights for large spaces.
How to Use:
- AUTO: ONLY auto turns on when DARK Enough (not completely dark, Brightness Upgraded) with MOTION Detected, and then auto turns off in 20s after no motion.
- ** Please make sure the ambient light is DARK ENOUGH (Some customers ignore this).
- ** Please don't put lights together too close in auto mode(Some of them might not auto turn ON).
- ** Hot, humid, dusty or not dark enough ambient light might make the motion sensor less responsive.
- OFF: Turns off
- ON: Stays on
NOTE:
* Please install the light with the Motion Sensor not covered and towards your movements.
* Please fully charge the battery for the first time.
Product Information
What Are Improved: Brighter, Larger Battery, Longer Charge. Long-Lasting Charge & Upgraded Brightness & Sensitive Motion Sensor & Magnet Adhesive Enhanced. GREAT for SMALL spaces. May need more lights for large spaces. LIGHT & MOTION SENSOR: Long Distance Sensing, Almost 16ft (within 120 Degree Sensing Angle). AUTO-Mode: ONLY turns on when DARK Enough with motion detected, and auto turns off within 20s after no motion detected. ON-Mode: Stays ON. With Auto-Off-On switch, you can also turn it OFF. ** Please make sure the ambient light is dark enough on AUTO mode(Some customers ignore this). ** Please do not put lights together too close on AUTO mode(Some may not turn ON). ENERGY SAVING DESIGN: Low Energy Consumption & Long-lasting. Built-in USB rechargeable Ternary Lithium Polymer Battery. ON-Mode: 10+ Hours, AUTO-Mode: Usually months-lasting in (1500+ sensing times if 20s per time). EYE CARING DESIGN: Bright & soft light, No flicker, non-dazzling, no spots, instant start. 8 LEDs*25 lumens per bulb, 3000K Warm Or 6000K Cool White with sufficient brightness. EASY TO INSTALL: IMPROVED built-in magnet and adhesive. Light without wiring, magnetic stick on anywhere. There are 3 ways to install, attach directly to any ironware, attach to the magnetic plate, or hang via the keyhole on the back. * WHAT YOU GET(Per Pack): 1 LED Light, 1 Magnetic Plate, 1 USB Charging Cord. *Product Size: Diameter 3.4 inches.
Features & Specs Room Type Bedroom, Dining Room, Kitchen, Living Room, Storage Room Specific Uses For Product Indoor use only Indoor Outdoor Usage Indoor Power Source Battery Powered Other Special Features of the Product Brighter, Enhanced Magnet & Adhesive, Larger Battery, Long Lasting Charge, Magnetic Stick On Anywhere Control Method Push Button Light Source LED Number of Light Sources 8 Voltage 3.7 Volts Lighting Method LED Controller Type Push Button Switch Type Push Button Water Resistance Level Not Water Resistant Brightness 25 Lumen Efficiency Energy-efficient Mounting Type Adhesive Fixture Type Removable Style Color Cool White Style Name Modern Light Fixture Form Puck Theme Space Shape Round Shade Color White Measurements Item Dimensions L x W x H 3.4"L x 3.4"W x 1"H Item Weight 2.4 ounces Number of Items 2 Unit Count 2.0 Count
Frequently Asked Questions
Does the warm 3000K option actually look cozy in a bedroom?
Yes, the 3000K warm white is specifically chosen to mimic the soft glow of an incandescent lamp, giving bedrooms, hallways and living rooms a warm, relaxing ambiance. Customers frequently describe it as a 'cozy' or 'candle-like' glow that flatters wood furniture and bedding.
Will a 3.4-inch puck light look obtrusive in my living room decor?
Not at all. The compact 3.4-inch round form factor is intentionally designed to read as a small accent rather than a fixture. In a living room, hallway console or bookshelf it tends to look like a designer accent lamp rather than a utilitarian night light.
Can I use this puck light to highlight a display cabinet or vitrina?
Yes, the 8-LED / 25-lumen output is well suited for display cabinets, coffee stations and vitrinas. The warm 3000K option in particular flatters glassware, ceramics and decorative objects without producing the harsh glare of a typical under-cabinet strip.
Does the cool 6000K option fit modern or minimalist interior styles?
Yes, the 6000K cool white works well with modern, Scandinavian and minimalist interiors that lean toward brighter, cleaner light. It is also the most popular choice for task areas like kitchens, pantries and closets where visibility matters more than mood.
Will the motion sensor ruin the ambient mood during a dinner party?
In Auto mode the sensor only activates in darkness, so a lit living room will not trigger the light. If you want it to stay on as decorative accent lighting, simply switch to the On position and it functions like a small permanent accent lamp.
Is this LED puck a stylish gift for someone who cares about home decor?
Yes, the minimalist round form, neutral housing and choice of warm or cool temperature make it an easy gift for decor-focused friends. It looks intentional on a bookshelf, console or display cabinet rather than like a typical hardware-store night light.
Does the rechargeable design look better than a nightlight with a visible cord?
Yes. With no power cord running down the wall, the installation looks clean and architectural. This is one of the main reasons designers and renters choose stick-on rechargeable pucks over plug-in nightlights for styled interiors.
How does this motion light compare to a decorative plug-in sconce for ambiance?
A plug-in sconce requires hardwiring or a visible cord and a nearby outlet, while the LUMI LIVING puck installs in seconds with no wiring and no electrician. The trade-off is brightness, so for true ambient lighting most customers use the puck as an accent layer rather than a primary sconce.
Can this light replace a bedside table lamp for a small bedroom?
It can serve that role in a small bedroom, studio apartment or guest room where space is limited. The 25-lumen warm output is enough for navigating the room and reading a phone screen, though it is not designed to replace a full reading lamp.
Does the puck light look cheap or plasticky on a wood bookshelf?
No, the housing has a clean matte finish that blends into most furniture, and the compact 3.4-inch footprint keeps it from dominating the surface. Many customers specifically mention how it 'disappears' into a hallway console or coffee bar setup.
Will the light bother my partner's sleep if mounted near the bed?
In Auto mode the light only triggers in darkness and only stays on for 20 seconds, so it will not glow continuously through the night. The warm 3000K option is much gentler on sleeping eyes than the cool white alternative.
Is the adhesive plate visible after installation?
The metal plate sits flush against the wall or cabinet, and the puck magnet snaps directly over it, hiding the plate completely. Once mounted, only the round light is visible, which keeps the wall surface looking clean and uncluttered.
Can I match the light to my existing warm white smart bulbs?
The 3000K warm white is calibrated to align with the most common residential warm white temperature, so it will blend well alongside typical lamps and smart bulbs in the same room. For consistent color temperature across a space, most decorators choose this option.
Will the cool white version look too clinical in a cozy bedroom?
The 6000K cool white is brighter and more energizing, which some sleepers find too clinical for a primary bedroom. Most customers choose 3000K warm for bedrooms and reserve the cool white for task areas like closets, pantries and stairways.
Does the light work as accent lighting for a coffee bar or display shelf?
Yes, the warm 3000K version is frequently used to highlight coffee stations, bar carts and display shelves. The motion sensor means the shelf lights up the moment you walk up, which feels both functional and intentional as a design moment.
How do I install the LUMI LIVING motion sensor puck light?
Choose one of three install methods: snap the puck directly onto any iron or steel surface using the built-in magnet, peel and stick the included adhesive metal plate to a wall or cabinet and then magnet-mount the puck to the plate, or use the keyhole slot on the back to hang the puck from a single small nail or screw. No wiring, drilling or electrician is required.
How do I charge the light, and how long does the battery last?
Connect the included USB cable to the charging port on the back of the puck, or drop the puck onto the included charging stand. A full charge takes a few hours and the indicator on the charging stand changes from red to green when complete. In Auto mode the battery delivers 1500+ activations, and in continuous On mode it lasts 10+ hours.
How do I switch between Auto, On and Off modes?
Press the single push-button on the side of the puck once to turn it On, again to switch to Auto (motion and darkness activated), and a third time to turn it Off. In Auto mode the light will only activate in a dark environment when motion is detected within the 16ft, 120-degree sensor range, and will turn off automatically after 20 seconds of no motion.
Does this light work on any surface, including wood, tile, glass and metal?
Yes. The included adhesive metal plate bonds to most clean, flat surfaces including painted drywall, wood, tile, glass and laminate. If the underlying surface is iron or steel, you can skip the plate entirely and attach the puck directly using the integrated magnet. The manufacturer does not recommend mounting on uneven, dirty, or textured walls without testing the adhesive first.
Is the adhesive plate strong enough to hold the light on a ceiling or overhead cabinet?
For ceiling or overhead mounting, make sure the surface is clean and dry, press the adhesive plate firmly for 30 seconds after application, and allow 24 hours for the adhesive to fully cure before hanging the puck. For extra security on a ceiling, the keyhole hang method with a small nail or screw is often more reliable than the adhesive plate alone.
What is included in the box?
Each order includes the LUMI LIVING motion sensor puck lights, the matching USB charging cable(s), the adhesive metal mounting plate(s), the charging stand/dock where applicable, and a quick-start guide. No additional batteries, screws or tools are required.
Is this light safe to use around children, pets and bedding?
Yes. The LUMI LIVING puck uses cool-running LED technology with no flame, no hot bulb, no smoke and no exposed heating element. It is safe to mount near curtains, closet fabrics, bedding and pet areas, and the 20-second auto-off timer prevents the light from running unattended for long periods.
What happens if the light stops working or arrives defective?
The LUMI LIVING puck is backed by standard customer support, and most sellers offer a replacement or refund for units that arrive defective or fail within the warranty window. Contact the seller with your order number, and they will typically send a replacement puck or troubleshooting steps without requiring a return.
What is the difference between a motion sensor puck light and a standard plug-in nightlight?
A motion sensor puck light is battery-powered, rechargeable and activates only when motion is detected in a dark room, which means it is portable, cord-free and energy-efficient. A standard plug-in nightlight is always on whenever the outlet has power, requires a wall outlet, and typically does not detect motion. The puck is also designed to be stick-mounted inside a closet or cabinet where a plug-in nightlight cannot reach.
