Nilight 60-Inch Truck Bed Light Bar – LED Strip for Camping, Loading, and Off-Road Night Use
Nilight 60-Inch Truck Bed Light Bar – LED Strip for Camping, Loading, and Off-Road Night Use
Couldn't load pickup availability
Why you'll love it
- 108 LEDs are 35% brighter than standard chips, making the vehicle highly visible in dense traffic day or night
- No-drilling installation with 5X-strength adhesive saves body panels from permanent modifications
- IP67 sealed housing withstands rain, snow, dirt, and sand for worry-free all-weather use
- Plug-N-Play 4-pin flat connector plugs directly into existing trailer adapter with no rewiring
- Universal 12V fitment works across nearly every pickup, SUV, RV, van, and trailer on the road
- 30,000-hour lifespan and 2-year warranty reduce long-term replacement cost
Perfect for
- Enhance rear brake and turn signal visibility on pickup trucks in heavy traffic
- Illuminate the area behind a truck or trailer when reversing at night
- Light up a truck bed for loading/unloading in low-light conditions
- Add ambient lighting under an RV awning during camping trips
- Install decorative or step-bar lighting for a customized vehicle look
Product Information
INCREDIBLE BRIGHTNESS - The Redline LED Tailgate Bar has 108 LEDs that shine 35% brighter than normal chips and ensure your car can be seen even in thickest traffic, day or night. FLEXIBLE & DURABLE LED LIGHTS - IP67 sealed housing, well protects LED strips against rain drops, snow, dirt and sand, super durable and flexible with up to 30,000 hrs. lifespan NO-DRILLING REQUIRED - it comes with a tough-as-nails adhesive enhancer that increases hold strength over 5X. No need to drill, it will not fall off, included mounting hardware for more secure installation. MOUNTED ANYWHERE WITH 12V POWER SOURCE - 60" LED strips, rated 12V, ultra long for cargo/pickup/camper/garage/RV Awning lighting or household party decoration. Multiple Use - widely used in Truck Bed Light, RV Awning Light, Step Bar LED Lighting, Side Door Led Lamp, Pickup Bed Light Kit, etc. Ideal for DIY. And wide use for Jeep Pickup Truck RV SUV. With the working voltage of 12V DC, fits for Amber turning on most vehicles. Such as Dodge Ram 1500 2500, 3500, 4500, Ford F150, F250, Chevy, Silverado, GMC, Sierra, Toyota Tundra, and most cars, trucks, Pickup, SUVs, RV, Van, trailers, etc.
Specifications: brake light, Reverse/DRL light Color: Red / White Working Voltage: 12-16V DC Light Source: 108pcs lads LED Strip Length: 60" Waterproof: IP67 Materials: LED Chip Silicone Working Lifespan: over 30,000 hours Plug-N-Play 4-pin flat connector, plugs directly into you trailer adapter. Features & Specs Compatible with Vehicle Type Car, Golf Cart, Truck Voltage 12 Volts Light Source Type LED Form Factor Strip Auto Part Position Outside Connectivity Technology Bluetooth Fit Type Universal Fit Additional Features Waterproof Water Resistance Level Waterproof Includes Remote? No Measurements Item Dimensions 8 x 0.3 x 7 inches Item Weight 0.2 Pounds Number of Pieces 1 Light Source Length 60 Inches
Frequently Asked Questions
Will this LED strip survive being mounted on an RV awning or camper exterior?
Yes. The IP67 sealed housing is built for open-air exposure, so rain, dust, UV, and campground humidity will not degrade the LEDs or the wiring.
Can I use this light bar to light up my truck bed while camping or at a tailgate?
Absolutely. The bright white reverse function doubles as a truck bed work light, making it easy to load coolers, gear, and camp equipment after dark at a campsite or in a parking lot.
Does the 4-pin plug work on most travel trailers and pop-up campers?
Yes. Any trailer with a standard 4-pin flat trailer connector will accept the plug directly, including most travel trailers, pop-up campers, and utility trailers.
Is the strip bright enough to light an outdoor dining area behind my truck?
The 108 white reverse LEDs put out a strong, even wash across the area directly behind the vehicle, which is enough to illuminate a tailgate table, chairs, and cooking setup for a small group.
Can I leave the strip mounted year-round on a vehicle that sits outside?
Yes. The IP67 rating and silicone-sealed housing are designed for permanent outdoor mounting, so the strip can stay on through sun, rain, snow, and dust without weather damage.
I camp in a desert area with blowing sand; will the dust kill the LEDs?
No. The IP67 rating means the housing is fully dust-tight, so blowing sand, fine dust, and grit will not get inside the strip to damage the LED chips or the circuit board.
Will the bar hold up if I mount it under an RV awning that flexes in the wind?
The combination of 5X adhesive enhancer and included mounting hardware keeps the strip attached even on surfaces that flex, and the flexible silicone housing bends with the mounting surface rather than cracking.
Is this a good portable option for off-road overlanding trips?
It is a permanent-mount strip rather than a removable camp light, but its universal 12V fitment and weather sealing make it ideal for Jeeps, SUVs, and overland rigs that see dirt, mud, and water crossings.
Does the amber turn signal function work well in bright sunlight at a busy campground?
Yes. The amber LEDs are part of the 108 high-output array, so they remain visible in direct sun, helping other drivers and campers see your turn intentions in a crowded campground loop or trailhead parking lot.
How does this compare to a magnetic LED work light for outdoor use?
Compared to a magnetic LED work light, this bar is hard-mounted, weather-sealed to IP67, and tied into your trailer wiring, so you do not have to set it up, take it down, or worry about it getting knocked off or stolen.
How does this compare to battery-powered LED strips for camping?
Battery-powered strips are portable but dim, short-lived, and need recharging, whereas this 12V hardwired strip pulls power from your vehicle, runs much brighter, and turns on automatically with your reverse or turn signal.
Can it handle being splashed by a river or driven through a shallow creek crossing?
The IP67 rating is specifically designed to withstand temporary immersion and heavy splashing, so creek crossings, river launches, and muddy trails will not flood the strip or the sealed 4-pin connector.
I am worried the silicone will yellow in the sun; will it still look good after a season outside?
The housing uses a UV-stable silicone that resists yellowing, and the red, amber, and white LEDs are tucked under the sealed lens, so the strip should keep a clean look after extended sun exposure.
Will the light bar drain my vehicle battery if I leave it on while camping?
The bar only draws power when your running lights, brake, turn signal, or reverse is active, so it will not drain your battery while the truck is parked and the ignition is off.
Is the strip flexible enough to follow the curve of an RV bumper or awning rail?
Yes. The single-row strip is built on a flexible PCB inside a bendable silicone sleeve, so it can conform to gentle curves along a tailgate, bumper, or awning rail without cracking.
How do I install the Nilight 60-inch tailgate light bar?
Clean the mounting surface with alcohol and let it dry, peel the backing from the adhesive enhancer, press the strip firmly along the top of the tailgate or under the bumper lip, secure both ends with the included mounting screws, and plug the 4-pin flat connector into your truck's trailer adapter. The whole process typically takes 30-60 minutes with basic hand tools.
What is included in the box, and do I need to buy anything else?
The box includes the 60-inch 108-LED light strip, the 4-pin flat plug wiring harness, adhesive enhancer, mounting screws, and an instruction sheet. You only need basic hand tools (a screwdriver and a clean rag); no extra wiring harness is required if your vehicle already has a 4-pin trailer adapter.
How do I clean and maintain the LED strip once it is mounted?
Wipe the strip with a damp cloth and mild soap during routine car washes, avoid harsh chemical solvents, and periodically check that the 4-pin connector is fully seated and free of debris. The IP67 silicone housing is sealed, so no internal maintenance is required.
Will this light bar fit my specific truck, SUV, or trailer?
It fits virtually any 12V vehicle with a standard 4-pin flat trailer connector, including Ford F-150 and F-250, Dodge Ram 1500/2500/3500, Chevy Silverado 1500/2500, GMC Sierra, Toyota Tundra and Tacoma, Jeep Wrangler and Gladiator, most SUVs, vans, and travel trailers. The 60-inch length spans the full width of standard full-size pickup tailgates.
Does it work on vehicles that do not have a factory trailer adapter?
Yes. You can add an aftermarket 4-pin trailer wiring adapter (sold at any auto parts store) and the light bar will plug into it with no rewiring. Once the adapter is installed, the plug-N-play connection is identical.
Is the strip safe to leave on in heavy rain, snow, or after a car wash?
Yes. The IP67 rating means the housing is fully dust-tight and protected against temporary water immersion, and the 4-pin trailer connector is a sealed automotive-grade design, so rain, snow, road spray, and car washes will not damage the strip or its connections.
What is the actual lifespan, and what does the 2-year warranty cover?
The LEDs are rated for 30,000+ hours of working life, which at typical driving use equates to many years of service. The 2-year warranty covers defects in materials and workmanship under normal use; keep your proof of purchase and contact Nilight support if you experience any failure.
What is the difference between a tailgate light bar and replacement tail light assemblies?
A tailgate light bar is a single 60-inch LED strip that mounts across the top of the tailgate to add a second layer of red running, brake, amber turn, and white reverse light without touching the factory housings. Replacement tail light assemblies are full OEM-style housings that swap in for the factory units, require more labor, and typically cost several times more, while this bar is a no-drill, plug-N-play add-on.
